Wynns Petrol EGR Cleaner

Improve your engine's performance with the Wynn's Petrol EGR Cleaner. This cleaner solves ignition problems, enhances your fuel economy and ensures better acceleration, without dismantling various components. It provides immediate thorough cleaning of the air intake system, air flow sensor, inlet valves, turbo and EGR systems.

• Harmless to catalytic convertors
• Restores and maintains engine performance and fuel economy
• Disperses unwanted gum, lacquer, tar and carbon for improved performance
• Can be used to bench clean engine components to remove excess carbon deposits
• Simple application in roughly 15 minutes
• Can be used with the Wynn's Formula Gold Petrol Treatment and the Wynn's Petrol Injector Cleaner
• Strong power jet spray to support the cleaning action
• Provides a regular and stable idle

• For the air intake manifold, air flow sensor, inlet valves and EGR valve of petrol engines.

• Warm up the engine.
• Open the air filter housing and remove the air filter from the air intake system.
• Run the engine up to 2000 rpm and keep it on ± 1500 rpm.
• Make sure the spray nozzle is directed into the air intake manifold.
• Spray with short bursts of maximum 1 second each.
• Allow the revs to pick back up before resuming.
• If necessary, actuate the throttle to avoid stalling.
• Let the engine idle for a few minutes with occasional throttle actuations, but do not exceed 3000 rpm.
• Continue until the 150 ml aerosol is consumed.
• Leave the engine running for at least one minute after the last acceleration.
• Stop the engine. Put the filter back in place.

• Extremely flammable aerosol
• Pressurized container: may burst if heated
• Harmful in contact with skin
• Do not exceed 3000 rpm during treatment. Do not spray on painted surfaces. In such case, immediately rinse with water to prevent damage. Carefully follow the directions.

View the Safety Data Sheet