Loctite Rear-view Mirror Adhesive Kit

The Loctite Rear-view Mirror Adhesive Kit compensates for a differential thermal expansion of parts and therefore, is also recommended for a metal vent window handle and hinges.

It has a unique bonding system for rear view mirrors, car telephones and all window mounted aerials.

• Ideal for glass mounted phone and radio aerials
• Suitable for glass and metal only
• Bond in minutes
• Clean and easy to use

• For best performance bond surfaces should be clean and free from grease.
• To ensure a fast and reliable cure, Activator should be applied to one of the bond surfaces and the adhesive to the other surface. Parts should be assembled within 15 minutes.
• The recommended bondline gap is 0.1 mm. Where bond gaps are large (up to a maximum of 0.5 mm), or faster cure speed is required, Activator should be applied to both surfaces.Parts should be assembled immediately (within 1 minute).
• Excess adhesive can be wiped away with organic solvent.
• Bond should be held clamped until adhesive has fixtured.
• Product should be allowed to develop full strength before subjecting to any service loads (typically 24 to 72 hours afterassembly, depending on bond gap, materials and ambient conditions)