Halfords Black Gloss Car Spray Paint - 400ml

The Halfords Black Gloss Spray Paint is an automotive-grade spray paint. It’s acrylic-based, and can be used on almost all vehicle finishes as well as steel, aluminium, most plastics, wood & stone.

This high-quality paint is fast-drying to make the job as easy and mess-free as possible, giving you excellent coverage and adhesion when used with a primer.

It’s UV-resistant too, which protects your paintwork against bleaching and fading from the sun over time and keeps your glossy finish intact.

The colour match system pairs your vehicle’s colour code with the matching shade in our range, so you can get a sleek and professional finish. When you’re done, you’ll have a scratch and shock-resistant finish, which prevents corrosion and weather damage.

DIRECTIONS FOR USE:
Shake the can for 3 minutes, making sure you can hear the agitator ball inside. This will ensure the contents are fully mixed and will give the best possible colour match. Test the paint colour first to make sure you’re happy with the match, then apply a first thin “dust” coat to give best possible adhesion to the primer.

Where repairing part of a panel, avoid spraying all the way up to the masked edge, stopping just before to make the blending step easier.

Allowing time in-between coats, slowly build up the layers of paint until a uniform thickness and coverage is achieved (this should be 2-3 coats).

Allow the paint to completely dry following the time guide on the can before moving on to clear lacquer.

CAUTIONS:
*The drying time can change depending on the ambient temperature, humidity and the thickness of the coats applied. Ensure the paint is fully dry before moving onto the next stage.

Take care when preparing older paint surfaces (pre-1970) as these may contain harmful lead.

This paint is colour-matched to the vehicle manufacturers original paint colour when new. Vehicle paints are susceptible to ageing, oxidisation and colour fade. Always spray out a test card first to ensure the colour match is suitable and follow the instructions to blend the colour into the existing paint.

Make sure you have enough ventilation in the area you’re painting in to prevent a harmful build-up of solvent gasses.

DANGER:
Extremely flammable aerosol. Pressurized container: May burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness. Keep out of reach of children. Use only outdoors or in a well-ventilated area. Buildup of explosive mixtures possible without sufficient ventilation. Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking. Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Do not breathe spray. Wear protective gloves and eye protection. Wash contaminated body parts thoroughly after handling. If medical advice is needed, have product container or label at hand. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. Call a doctor if you feel unwell. Dispose of contents/container in accordance with regional regulations. Repeated exposure may cause skin dryness or cracking. Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.